DataSheet8.cn


PDF ( 数据手册 , 数据表 ) HS-390RH883S

零件编号 HS-390RH883S
描述 Radiation Hardened CMOS Analog Switches
制造商 Intersil Corporation
LOGO Intersil Corporation LOGO 


1 Page

No Preview Available !

HS-390RH883S 数据手册, 描述, 功能
September 1995
HS-302RH/883S, HS-303RH/883S,
HS-306RH/883S, HS-307RH/883S,
HS-384RH/883S, HS-390RH/883S
Radiation Hardened
CMOS Analog Switches
Features
Description
• This Circuit is Processed in Accordance to Mil-Std-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Radiation Hardened
- Functional Total Dose Exceeds 1 x 105 RAD Si
• Pin for Pin Compatible with Intersil HI-3XX Series
Analog Switches
• Analog Signal Range 15V
• Low Leakage
• Low RON
• No Latch Up
• Versions for 5V and 15V Digital Systems
• Low Operating Power
• Military Temperature Range -55oC to +125oC
Applications
• Sample and Hold i.e. Low Leakage Switching
• Op Amp Gain Switching i.e. Low ON Resistance
• Switched Capacitor Filters
• Low Level Switching Circuits
• Satellites
• Nuclear Reactor Controls
• Military Environments
The HS-3XXRH/883S family of analog switches are
monolithic devices fabricated using Radiation Hardened
CMOS technology and the Intersil dielectric isolation pro-
cess for latch-up free operation. Improved total dose hard-
ness is obtained by layout (thin oxide tabs extending to a
channel stop) and processing (hardened gate oxide). These
switches offer low-resistance switching performance for ana-
log voltages up to the supply rails. “ON” resistance is low
and stays reasonably constant over the full range of operat-
ing voltage and current. “ON” resistance also stays reason-
ably constant when exposed to radiation, being typically 30
pre-rad and 35post 100K RAD-Si. All devices provide
break-before-make switching.
The 6 devices in this switch series are differentiated by type
of switch action, pinout and digital logic levels. The HS-302/
303/384/390RH/883S switches have 5V digital inputs while
the HS-306/307RH/883S switches have 15V digital inputs.
All devices are available in Ceramic Flatpack and SBDIP
packages. The HS-3XXRH/883S switches can directly
replace the HI-3XX series devices.
Functional Diagram
IN N P
D
Ordering Information
PART NUMBER
HS1-302RH/883S
HS9-302RH/883S
HS1-302RH/Sample
HS9-302RH/Sample
HS1-303RH/883S
HS9-303RH/883S
HS1-303RH/Sample
HS9-303RH/Sample
HS1-306RH/883S ( Note 1)
HS9-306RH/883S ( Note 1)
TEMPERATURE RANGE
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
+25oC
+25oC
-55oC to +125oC
-55oC to +125oC
SCREENING LEVEL
PACKAGE
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
Sample
14 Lead SBDIP
Sample
14 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
Sample
14 Lead SBDIP
Sample
14 Lead Ceramic Flatpack
Intersil /883 Class S Equivalent 14 Lead SBDIP
Intersil /883 Class S Equivalent 14 Lead Ceramic Flatpack
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999 1
Spec Number 518526
File Number 3067.1







HS-390RH883S pdf, 数据表
Specifications HS-3XXRH/883S
TABLE 4. HS-306/307RH/883S DC POST 100K RAD (Si) ELECTRICAL CHARACTERISTICS
Tested Per Mil-Std-883. Unless Otherwise Specified: HS-306RH/307RH/883S V- = -15V, V+ = +15V, VAH = +11.0V, VAL = 3.5V
LIMITS
PARAMETER
“Switch On” Resistance
Leakage Current Into the
Source Terminal of an “Off”
Switch
Leakage Current into the Drain
Terminal of an “Off” Switch
Leakage Current from an “On”
Driver Into the Switch (Drain &
Source)
Positive Supply Current
Negative Supply Current
High Level Address Current
Low Level Address Current
Break-Before-Make Time
Delay (HS-307RH/883S Only)
Switch Turn-On Time
Switch Turn-Off Time
SYMBOL
+RDS
-RDS
+IS(OFF)
-IS(OFF)
CONDITIONS
VD = 10V, IS = -10mA, S1/S2/S3/S4
VD = -10V, IS = 10mA, S1/S2/S3/S4
VS = +14V, VD = -14V, S1/S2/S3/S4
VS = -14V, VD = +14V, S1/S2/S3/S4
+ID(OFF)
-ID(OFF)
-ID(ON)
-ID(ON)
VS = -14V, VD = +14V, S1/S2/S3/S4
VS = +14V, VD = -14V, S1/S2/S3/S4
VS = VD = +14V, S1/S2/S3/S4
VS = VD = -14V, S1/S2/S3/S4
I(+)
I(-)
IAH
IAL
TOPEN
All Channels VA = 0V
All Channels VA = 15V
All Channels VA = 0V
All Channels VA = 15V
All Channels High
All Channels Low
RL = 300, VS = +3V, (Note 1)
TON
TOFF
RL = 300, VS = +3V, (Note 1)
RL = 300, VS = +3V, (Note 1)
TEMPERATURE
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
+25oC
MIN
-
-
-100
-100
MAX
60
60
100
100
-100
-100
-100
-100
100
100
100
100
-
-
-100
-100
-1
-1
2
100
1
-
-
+1
+1
300
- 500
- 450
NOTE: 1. VAL = 0V; VAH = 15V
UNITS
nA
nA
nA
nA
nA
nA
µA
mA
µA
µA
µA
µA
ns
ns
ns
TABLE 5. HS-302RH/303RH/384RH/390RH/883S DC POST BURN-IN DELTA ELECTRICAL CHARACTERISTICS
Guaranteed, Per Mil-Std-883. Unless Otherwise Specified: V- = -15V, V+ = +15V, VAH = +4.0V, VAL = 0.8V
PARAMETER
SYMBOL
CONDITIONS
GROUP A
SUB-
GROUPS
TEMPERATURE
LIMITS
MIN MAX UNITS
“Switch On”
Resistance
+RDS
-RDS
VD = 10V, IS = -10mA,
S1/S2/S3/S4
VD = -10V, IS = 10mA,
S1/S2/S3/S4
1
+25oC
-5 5
1
+25oC
-5 5
Leakage Current
+IS(OFF) VS = +14V, VD = -14V,
1
+25oC
-2 2
nA
Into the Source
S1/S2/S3/S4
Terminal of an “Off”
Switch
-IS(OFF) VS = -14V, VD = +14V,
1
+25oC
-2 2
nA
S1/S2/S3/S4
Leakage Current
+ID(OFF) VS = -14V, VD = +14V,
1
+25oC
-2 2
nA
into the Drain
S1/S2/S3/S4
Terminal of an “Off”
Switch
-ID(OFF) VS = +14V, VD = -14V,
1
+25oC
-2 2
nA
S1/S2/S3/S4
Leakage Current
from an “On” Driver
Into the Switch
(Drain & Source)
+ID(ON)
-ID(ON)
VS = VD = +14V, S1/S2/S3/S4
VS = VD = -14V, S1/S2/S3/S4
1
1
+25oC
+25oC
-2 2
-2 2
nA
nA
Spec Number 518526
8







HS-390RH883S equivalent, schematic
HS-302RH/303RH/306RH/307RH/384RH/390RH/883S
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Sales Office Headquarters
NORTH AMERICA
Intersil Corporation
P. O. Box 883, Mail Stop 53-204
Melbourne, FL 32902
TEL: (407) 724-7000
FAX: (407) 724-7240
EUROPE
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: (32) 2.724.2111
FAX: (32) 2.724.22.05
ASIA
Intersil (Taiwan) Ltd.
7F-6, No. 101 Fu Hsing North Road
Taipei, Taiwan
Republic of China
TEL: (886) 2 2716 9310
FAX: (886) 2 2715 3029
Spec Number
16










页数 16 页
下载[ HS-390RH883S.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
HS-390RH883SRadiation Hardened CMOS Analog SwitchesIntersil Corporation
Intersil Corporation

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap