|
|
零件编号 | NUC126 | ||
描述 | 32-BIT MICROCONTROLLER | ||
制造商 | nuvoton | ||
LOGO | |||
1 Page
NUC126
ARM CORTEX® -M
32-BIT MICROCONTROLLER
NuMicro® Family
NUC126 Series
Datasheet
The information described in this document is the exclusive intellectual property of
Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.
Nuvoton is providing this document only for reference purposes of NuMicro microcontroller based
system design. Nuvoton assumes no responsibility for errors or omissions.
All data and specifications are subject to change without notice.
For additional information or questions, please contact: Nuvoton Technology Corporation.
www.nuvoton.com
May 05, 2017
Page 1 of 139
Rev 1.00
NUC126
1 GENERAL DESCRIPTION
The NuMicro® NUC126 series microcontroller based on the ARM® Cortex® -M0 core operates at
up to 72 MHz. With its crystal-less USB 2.0 FS interface, it is able to generate precise frequency
required by USB protocol without the need of external crystal. It features adjustable VDDIO pins for
specific I/O pins with a wide range of voltage from 1.8V to 5.5V for various operating voltages of
external components, a unique high-speed PWM with clock frequency up to 144 MHz for
precision control, and an integrated hardware divider to speed up the calculation for the control
algorithms. Apart from that, the NUC126 also integrates SPROM (Security Protection ROM)
which provides a secure code execution area to protect the intelligent property of developers. The
NUC126 series is ideal for industrial control, motor control and metering applications.
The NUC126 series supports the wide voltage range from 2.5V to 5.5V and temperature ranging
from -40℃ to 105℃, up to 256 Kbytes of Flash memory, 20 Kbytes of SRAM, 4 Kbytes of ISP (In-
System Programming) ROM as well as ICP (In-Circuit Programming) ROM and IAP (In-
Application Programming) ROM in 48-, 64- or 100-pin packages. It also supports high immunity of
8KV ESD (HBM)/4KV EFT. It is also equipped with plenty of peripherals such as USB interface,
Timers, Watchdog Timers, RTC, PDMA, EBI, UART, Smart Card Interface, SPI, I²S, I²C, GPIO,
up to 12 channels of 16-bit PWM, up to 20 channels of 12-bit ADC, analog comparator,
temperature sensor, low voltage reset, brown-out detector, 96-bit UID (Unique Identification), and
128-bit UCID (Unique Customer Identification).
May 05, 2017
Page 8 of 139
Rev 1.00
NUC126
– Supports 12-bit SAR ADC
– 12-bit resolution and 10-bit accuracy is guaranteed
– Analog input voltage range: 0~ AVDD
– Supports external VREF pin
– Up to 20 single-end analog input channels
– Maximum ADC peripheral clock frequency is 16 MHz
– Conversion rate up to 800K SPS at 5V
– Configurable ADC internal sampling time
– Supports single-scan, single-cycle-scan, and continuous scan and scan on enabled
channels
– Supports individual conversion result register with valid and overrun indicators for each
channel
– Supports digital comparator to monitor conversion result and user can select whether
to generate an interrupt when conversion result matches the compare register setting
– An A/D conversion can be triggered by:
Software enable
External pin (STADC)
Timer 0~3 overflow pulse trigger
PWM triggers with optional start delay period
– Supports 4 internal channels for
Operational amplifier output
Band-gap VBG input
Temperature sensor input
VBAT voltage measure
– Supports internal reference voltage: 2.048V, 2.560V, 3.072V and 4.096V
– Supports PDMA transfer
Analog Comparator
– Supports up to 2 rail-to-rail analog comparators
– Supports 4 multiplexed I/O pins at positive node.
– Supports I/O pin and internal voltages at negative node
– Support selectable internal voltage reference from:
Band-gap VBG
Voltage divider source from AVDD and internal reference voltage.
– Supports programmable hysteresis
– Supports programmable speed and power consumption
– Interrupts generated when compare results change, interrupt event condition is
programmable.
– Supports power-down wake-up
– Supports triggers for break events and cycle-by-cycle control for PWM
Cyclic Redundancy Calculation Unit
– Supports four common polynomials CRC-CCITT, CRC-8, CRC-16, and CRC-32
– Programmable initial value
– Supports programmable order reverse setting for input data and CRC checksum
– Supports programmable 1’s complement setting for input data and CRC checksum.
– Supports 8/16/32-bit of data width
– Interrupt generated once checksum error occurs
User Configurable VDD1=1.8~5.5V IO Interface
– Supports UART0, SPI0 and I2C0
Supports 96-bit Unique ID (UID)
Supports 128-bit Unique Customer ID (UCID)
One built-in temperature sensor with 1℃ resolution
Brown-out detector
May 05, 2017
Page 16 of 139
Rev 1.00
|
|||
页数 | 30 页 | ||
下载 | [ NUC126.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
NUC120 | Driver Reference Guide | nuvoton |
NUC120LC1BN | Driver Reference Guide | nuvoton |
NUC120LC1DN | 32-BIT MICROCONTROLLER | nuvoton |
NUC120LD1BN | Driver Reference Guide | nuvoton |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |