DataSheet8.cn


PDF ( 数据手册 , 数据表 ) CB1EBH-10S-1.5H-PEJC2

零件编号 CB1EBH-10S-1.5H-PEJC2
描述 Memory Stick Connectors
制造商 Hirose Electric
LOGO Hirose Electric LOGO 


1 Page

No Preview Available !

CB1EBH-10S-1.5H-PEJC2 数据手册, 描述, 功能
NEW
Memory Stick® Connectors
CB1 Series
Card Push Insert/Push Eject
<CB1G Series>
sOutline
Receptacle connectors for use with the new generation of
digital media devices requiring “Memory Stick®” type of
consumer removable memory card.
Several variations are available: Miniature, Low Profile and
with or without ejection mechanism.
sFeatures
1. Indication of Incorrect Card Insertion
The connector will not allow the card to be complete
inserted from the wrong end or reversed.
The card will stop about 7mm before complete insertion
position, visually indicating incorrect insertion.
2. Protection of the Contacts
Incorrect insertion of the card will not damage the
contacts. The card can be easily withdrawn and re-
inserted correctly.
3. Excellent Card Handling
The type that is equipped with an ejection mechanism
provides a long ejection of the card which offers excellent
card handling qualities.
*Memory Stick is a registered trademark of the Sony Corporation.
q Card ejection distance of 10 mm
q Mounting height of 3.5 mm
q Mounting area: Smaller design is 78% of former
size
Button Touch Ejection
<CB1F Series>
q Card ejection with tactile button operation
q Card ejection distance of 10 mm
q Equipped with card ejection switch
Without Card Ejection
<CB1D Series>
q Miniaturized, low profile design
q Improved installation to the equipment is permitted
using (M1.7) tapping screws
q Can be equipped with an ejection mechanism
depending on the design of the equipment side
portion
Note: Please position the card ejection button at the side of the equipment.
2003.12
1







CB1EBH-10S-1.5H-PEJC2 pdf, 数据表
BUsage Precautions
1.Care should be taken to correctly insert/withdraw the Memory Stick® card. Following correct insertion/withdrawal procedures
will prevent device or connector damage.
When handling the CB1C series connectors, hold it in the areas indicated by the arrows, as illustrated below.
CB1A Series
CB1C Series
Contacts
Metal hold-down
Recommended
holding area
Recommended
holding area
Contacts, metal hold-down and
ejection components areas
2.Follow the recommended insertion angles, as illustrated below.
<Memory Stick Allowable Insertion Angles>
CB1A Series
±2°MAX
Outline of the Memory
Stick card
CB1C Series
±1°MAX
±1°MAX
0°±0.22°
±0.5°MAX
Outline of the Memory
Stick card
±0.2°MAX
Initial insertion
(15 mm max.)
Complete insertion
(from 15 mm to full insertion)
8














页数 10 页
下载[ CB1EBH-10S-1.5H-PEJC2.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
CB1EBH-10S-1.5H-PEJC2Memory Stick ConnectorsHirose Electric
Hirose Electric

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap