DataSheet8.cn


PDF ( 数据手册 , 数据表 ) HA-2510-883

零件编号 HA-2510-883
描述 High Slew Rate Operational Amplifier
制造商 Intersil
LOGO Intersil LOGO 


1 Page

No Preview Available !

HA-2510-883 数据手册, 描述, 功能
Data Sheet
HA-2510/883
August 13, 2015
FN3697.5
High Slew Rate Operational Amplifier
The HA-2510/883 is a high performance operational
amplifier which sets the standards for maximum slew rate
and wide bandwidth operation in moderately powered,
internally compensated, monolithic devices. In addition to
excellent dynamic characteristics, this dielectrically isolated
amplifier also offers low offset current and high input
impedance.
The 50V/s minimum slew rate and fast settling time of
the HA-2510/883 are ideally suited for high speed D/A,
A/D, and pulse amplification designs. The HA-2510/883’s
superior bandwidth and 750kHz minimum full power
bandwidth are extremely useful in RF and video
applications. To insure compliance with slew rate and
transient response specifications, all devices are 100%
tested for AC performance characteristics over full
temperature limits. To improve signal conditioning accuracy,
the HA-2510/883 provides a maximum offset current of 25nA
and a minimum input impedance of 50M, both at 25oC, as
well as offset voltage adjust capability.
Ordering Information
PART
NUMBER
PART
MARKING
TEMP.
RANGE
(oC)
PACKAGE
PKG.
DWG.
#
HA2-2510/883 HA2-2510/883 -55 to 125 8 Pin Can T8.C
HA7-2510/883
(No longer
available or
supported)
HA7-2510/883
-55 to 125
8 Ld CERDIP F8.3A
Pinouts
HA-2510/883
(CERDIP)
TOP VIEW
BAL 1
-IN 2
+IN 3
V- 4
-
+
8 COMP
7 V+
6 OUT
5 BAL
Features
• This Circuit is Processed in Accordance to MIL-STD-883
and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . .50V/s (Min)
65V/s (Typ)
• Wide Power Bandwidth . . . . . . . . . . . . . . . . 750kHz (Min)
• Low Offset Current . . . . . . . . . . . . . . . . . . . . . . 25nA (Min)
10nA (Typ)
• High Input Impedance . . . . . . . . . . . . . . . . . . 50M(Min)
100M(Typ)
• Wide Small Signal Bandwidth . . . . . . . . . . . .12MHz (Typ)
• Fast Settling Time (0.1% of 10V Step) . . . . . . 250ns (Typ)
• Low Quiescent Supply Current . . . . . . . . . . . . 6mA (Max)
• Internally Compensated For Unity Gain Stability
Applications
• Data Acquisition Systems
• RF Amplifiers
• Video Amplifiers
• Signal Generators
• Pulse Amplification
HA-2510/883
(METAL CAN)
TOP VIEW
COMP
8
BAL 1
7 V+
-IN 2
-
+
6 OUT
+IN 3
5 BAL
4
V-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas LLC 2002, 2004, 2005, 2006, 2015. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.







HA-2510-883 pdf, 数据表
HA-2510/883
Ceramic Dual-In-Line Frit Seal Packages (CERDIP)
c1 LEAD FINISH
-A- -D-
E
-B-
bbb S C A - B S D S
BASE
METAL
(c)
b1
MM
(b)
SECTION A-A
BASE
PLANE
SEATING
PLANE
S1
b2
b
D
AA
e
Q
-C- A
L
eA/2
eA
c
ccc M C A - B S D S
aaa M C A - B S D S
NOTES:
1. Index area: A notch or a pin one identification mark shall be
located adjacent to pin one and shall be located within the
shaded area shown. The manufacturer’s identification shall not
be used as a pin one identification mark.
2. The maximum limits of lead dimensions b and c or M shall be
measured at the centroid of the finished lead surfaces, when
solder dip or tin plate lead finish is applied.
3. Dimensions b1 and c1 apply to lead base metal only. Dimension
M applies to lead plating and finish thickness.
4. Corner leads (1, N, N/2, and N/2+1) may be configured with a
partial lead paddle. For this configuration dimension b3 replaces
dimension b2.
5. This dimension allows for off-center lid, meniscus, and glass
overrun.
6. Dimension Q shall be measured from the seating plane to the
base plane.
7. Measure dimension S1 at all four corners.
8. N is the maximum number of terminal positions.
9. Dimensioning and tolerancing per ANSI Y14.5M - 1982.
10. Controlling dimension: INCH.
F8.3A MIL-STD-1835 GDIP1-T8 (D-4, CONFIGURATION A)
8 LEAD CERAMIC DUAL-IN-LINE FRIT SEAL PACKAGE
INCHES
MILLIMETERS
SYMBOL MIN MAX MIN MAX NOTES
A
- 0.200 - 5.08
-
b
0.014
0.026
0.36
0.66
2
b1
0.014
0.023
0.36
0.58
3
b2
0.045
0.065
1.14
1.65
-
b3
0.023
0.045
0.58
1.14
4
c
0.008
0.018
0.20
0.46
2
c1
0.008
0.015
0.20
0.38
3
D - 0.405 - 10.29 5
E
0.220
0.310
5.59
7.87
5
e 0.100 BSC
2.54 BSC
-
eA 0.300 BSC
7.62 BSC
-
eA/2
0.150 BSC
3.81 BSC
-
L
0.125
0.200
3.18
5.08
-
Q
0.015
0.060
0.38
1.52
6
S1 0.005 - 0.13
-
7
90o 105o 90o 105o
-
aaa
- 0.015 - 0.38
-
bbb
- 0.030 - 0.76
-
ccc
- 0.010 - 0.25
-
M
-
0.0015
-
0.038
2, 3
N8
88
Rev. 0 4/94
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
8 FN3697.5
August 13, 2015














页数 8 页
下载[ HA-2510-883.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
HA-2510-883High Slew Rate Operational AmplifierIntersil
Intersil

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap