|
|
零件编号 | E0C6S37 | ||
描述 | 4-bit Single Chip Microcomputer | ||
制造商 | Epson | ||
LOGO | |||
1 Page
PF760-03
E0C6S37
4-bit Single Chip Microcomputer
LOoPwpreoVrdaoutlictoatnsge
q Core CPU Architecture
q SVD Circuit / Comparator
q Super Low Operating Voltage (0.9V)
q High Quality Display LCD Driver
s DESCRIPTION
The E0C6S37 is an advanced single-chip CMOS 4-bit microcomputer consisting of the E0C6200A CMOS 4-bit
core CPU. It also contains the ROM, RAM, LCD driver circuit, time base counter and stopwatch counter. The
E0C6S37 provides an excellent solution for low-power consumption systems with clock functions.
s FEATURES
q CMOS LSI 4-bit parallel processing
q Clock ..................................................... 32.768kHz (Typ.)
CR or Crystal oscillation circuit selectable through mask option
q Instruction set ........................................ 100 instructions
q Instruction execution time ..................... 153µsec, 214µsec or 366µsec (depending on instruction)
q ROM capacity ....................................... 1,024 words × 12 bits
q RAM capacity ........................................ 80 words × 4 bits
q Input port ............................................... 4 bits (pull-down resistors are available by mask option)
q Output port ............................................ 4 bits (general purpose port)
2 bits (for buzzer output) : BZ/BZ 4kHz, 2kHz
1 bit (for clock output) : 16kHz, 8kHz, 4kHz, 2kHz
q I/O port .................................................. 4 bits
q LCD driver ............................................. 26 segments × 2 commons (1/2 duty), 3 commons (1/3 duty)
or 4 commons (1/4 duty)
q Built-in supply voltage detection (SVD) circuit
q Built-in stopwatch timer
q Interrupts ............................................... External : Input interrupt
1 line
Internal : Timer interrupt
1 line
Stopwatch interrupt 1 line
q Supply voltage ...................................... 1.5V/3.0V (Minimum operating voltage: 0.9V/1.8V)
q Current consumption ............................ HALT mode (32.768kHz/3.0V)
: 1.0µA (Typ.)
OPERATING mode (32.768kHz/3.0V) : 2.5µA (Typ.)
q Package ................................................ QFP6-60pin (plastic)
Die form
s LINE UP
Model
E0C6SL37
E0C6S37
E0C6SB37
Supply voltage
1.5V (0.9 to 2.0V)
3.0V (1.8 to 3.6V)
3.0V (0.9 to 3.6V)
Clock (oscillation)
32.768kHz Crystal or 65kHz CR oscillation (Typ.)
32.768kHz Crystal or 65kHz CR oscillation (Typ.)
32.768kHz Crystal or 65kHz CR oscillation (Typ.)
SEIKO EPSON CORPORATION
1
E0C6S37
E0C6SB37 (Crystal, Normal Operating Mode)
(Unless otherwise specified: VDD=0V, VSS=-3.0V, fOSC=32.768kHz, Ta=25°C, CG=25pF, VS1/VL1–VL3 are internal voltage, C1–C5=0.1µF)
Characteristic
Symbol
Condition
Min.
Typ.
Max.
Unit
Internal voltage
VL1 Connect 1MΩ load resistor between VDD and VL1
(without panel load)
-1.15
-1.05
-0.95
V
VL2 Connect 1MΩ load resistor between VDD and VL2
(without panel load)
2•VL1-0.1
2•VL1×0.9 V
VL3 Connect 1MΩ load resistor between VDD and VL3
(without panel load)
3•VL1-0.1
3•VL1×0.9 V
SVD voltage
VSVD
-1.30
-1.20
-1.10
V
SVD circuit response time tSVD
100 µS
Current consumption
IOP During HALT
During execution *1
Without panel load
1.0 2.5 µA
2.5 5.0 µA
∗1: The SVD circuit is turned off.
E0C6SB37 (Crystal, Heavy Load Protection Mode)
(Unless otherwise specified: VDD=0V, VSS=-3.0V, fOSC=32.768kHz, Ta=25°C, CG=25pF, VS1/VL1–VL3 are internal voltage, C1–C5=0.1µF)
Characteristic
Symbol
Condition
Min.
Typ.
Max.
Unit
Internal voltage
VL1 Connect 1MΩ load resistor between VDD and VL1
(without panel load)
-1.15
-1.05
-0.95
V
VL2 Connect 1MΩ load resistor between VDD and VL2
(without panel load)
2•VL1-0.1
2•VL1×0.85 V
VL3 Connect 1MΩ load resistor between VDD and VL3
(without panel load)
3•VL1-0.1
3•VL1×0.85 V
SVD voltage
SVD circuit response time
VSVD
tSVD
-1.30
-1.20
-1.10
100
V
µS
Current consumption
IOP During HALT
During execution *1
Without panel load
2.0 5.5 µA
5.5 10.0 µA
∗1: The SVD circuit is turned off.
E0C6SB37 (CR, Normal Operating Mode)
(Unless otherwise specified: VDD=0V, VSS=-3.0V, fOSC=65kHz, RCR=470kΩ, Ta=25°C, VS1/VL1–VL3 are internal voltage, C1–C5=0.1µF)
Characteristic
Symbol
Condition
Min.
Typ.
Max.
Unit
Internal voltage
VL1 Connect 1MΩ load resistor between VDD and VL1
(without panel load)
-1.15
-1.05
-0.95
V
VL2 Connect 1MΩ load resistor between VDD and VL2
(without panel load)
2•VL1-0.1
2•VL1×0.9 V
VL3 Connect 1MΩ load resistor between VDD and VL3
(without panel load)
3•VL1-0.1
3•VL1×0.9 V
SVD voltage
VSVD
-1.30
-1.20
-1.10
V
SVD circuit response time tSVD
100 µS
Current consumption
IOP During HALT
During execution *1
Without panel load
8.0
15.0
15.0
20.0
µA
µA
∗1: The SVD circuit is turned off.
E0C6SB37 (CR, Heavy Load Protection Mode)
(Unless otherwise specified: VDD=0V, VSS=-3.0V, fOSC=65kHz, RCR=470kΩ, Ta=25°C, VS1/VL1–VL3 are internal voltage, C1–C5=0.1µF)
Characteristic
Internal voltage
Symbol
Condition
VL1 Connect 1MΩ load resistor between VDD and VL1
(without panel load)
Min.
-1.15
Typ.
-1.05
Max.
-0.95
Unit
V
VL2 Connect 1MΩ load resistor between VDD and VL2
(without panel load)
VL3 Connect 1MΩ load resistor between VDD and VL3
(without panel load)
2•VL1-0.1
3•VL1-0.1
2•VL1×0.85
3•VL1×0.85
V
V
SVD voltage
SVD circuit response time
Current consumption
VSVD
tSVD
IOP
∗1: The SVD circuit is turned off.
During HALT
During execution *1
Without panel load
-1.30
-1.20
16.0
30.0
-1.10
100
30.0
40.0
V
µS
µA
µA
8
|
|||
页数 | 10 页 | ||
下载 | [ E0C6S37.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
E0C6S37 | 4-bit Single Chip Microcomputer | Epson |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |