DataSheet8.cn


PDF ( 数据手册 , 数据表 ) KD02CK

零件编号 KD02CK
描述 DC Solid-State Relay
制造商 TELEDYNE
LOGO TELEDYNE LOGO 


1 Page

No Preview Available !

KD02CK 数据手册, 描述, 功能
Series KD/LD
10A, 60Vdc Optically Isolated, Short-Circuit Protected
DC Solid-State Relay
Part Number* Relay Description
KD00CK
5A Solid-State Relay (SSR)
KD02CK
5A SSR with Switch Status
KD20CK
5A SSR with Short-Circuit Protection
KD22CK
5A SSR with Short-Circuit Protection and Switch
Status
LD00CM
10A Solid-State Relay
LD02CM
10A SSR with Switch Status
LD20CM
10A SSR with Short-Circuit Protection
LD22CM
10A SSR with Short-Circuit Protection and Switch
Status
* The Y suffix denotes parameters tested to MIL-PRF-28750 specifications.
The W suffix denotes parameters tested to Teledyne specifications.
ELECTRICAL SPECIFICATIONS
(-55°C TO +105°C UNLESS OTHERWISE NOTED)
INPUT (CONTROL) SPECIFICATION
When used in 2 terminal configuration
(TTL or direct control) (See Fig. 1) Min Typ Max Units
Input Current @ VBIAS = 5 Vdc (See Fig. 2)
Turn-Off Voltage (Guaranteed Off)
15 mAdc
1.5 Vdc
Turn-On Voltage (Guaranteed On)
3.8
Vdc
Reverse Voltage Protection
-32 Vdc
Input Supply Range (See Note 1)
3.8
32 Vdc
INPUT (CONTROL) SPECIFICATION
When used in 3 terminal configuration
(CMOS or open collector TTL) (See Fig. 1) Min Typ
Control Current
V = 5 Vdc
CONTROL
VCONTROL = 18 Vdc
Control Voltage Range
0
Max Units
250 µAdc
1 mAdc
18 Vdc
Bias Supply Voltage (See Note 1)
3.8
32 Vdc
Bias Supply Current
16 mAdc
Turn-Off Voltage (Guaranteed Off)
3.2
Vdc
Turn-On Voltage (Guaranteed On)
0.3 Vdc
FEATURES
• Available with short-circuit/current
overload protection
• Available with switch status output
• TTL and CMOS compatible control
• Low ON resistance power FET output
• Fast switching speed
• Meets 28 Vdc system requirements of
MIL-STD-704
• Optical isolation
• Low profile hermetic package
• Built and tested to the requirements of
MIL-PRF-28750
DESCRIPTION
The Series KD and LD solid-state relays
are screened utilizing MIL-PRF-28750
test methods and are packaged in low
profile hermetically sealed cases. These
relays are constructed with state-of-the-
art solid state techniques and feature
fully floating power FET output
technology. This allows the load to be
connected to either output terminal and
provides a low ON resistance. The input
(control) and output are optically isolated
to protect input logic circuits from output
transients. Available options include
short circuit and current overload
protection, which provides complete
protection for both the relay and system
wiring. This feature not only provides
protection should a short or overload
occur while the relay is on, but will also
provide protection should the relay be
switched into a short. The second option
is a status output line. Switch status
returns the true status of the output
switch and is optically isolated from the
load. It provides status indication
independent of the control circuit of the
relay. The status line provides a logic 0
(low) when the relay output is off with
load voltage and continuity present, and
a logic 1 (high) when the output is on.
© 2002 TELEDYNE RELAYS
(800) 284-7007 • www.teledynerelays.com
KD/LD 51
KD/LD\072002\Q1












页数 4 页
下载[ KD02CK.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
KD02CKDC Solid-State RelayTELEDYNE
TELEDYNE

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap