DataSheet8.cn


PDF ( 数据手册 , 数据表 ) NOA1213

零件编号 NOA1213
描述 Ambient Light Sensor
制造商 ON Semiconductor
LOGO ON Semiconductor LOGO 


1 Page

No Preview Available !

NOA1213 数据手册, 描述, 功能
NOA1213
Product Preview
Ambient Light Sensor with
Dark Current Compensation
Description
The NOA1213 is a very low power ambient light sensor (ALS) with
an analog current output and a power down mode to conserve power.
Designed primarily for handheld device applications, the active power
dissipation of this chip is less than 8 mA at dark and its quiescent
current consumption is less than 200 pA in power down mode. The
device can operate over a very wide range of voltages from 2 V to
5.5 V. The NOA1213 employs proprietary CMOS image sensing
technology from ON Semiconductor, including built−in dynamic dark
current compensation to provide large signal to noise ratio (SNR) and
wide dynamic range (DR) over the entire operating temperature range.
The photopic optical filter provides a light response similar to that of
the human eye. Together the photopic light response and dark current
compensation insures accurate light level detection.
Features
Senses Ambient Light and Provides an Output Current Proportional
to the Ambient Light Intensity
Photopic Spectral Response
Dynamic Dark Current Compensation
Three Selectable Output Current Gain Modes in Approximately 10x
Steps
Power Down Mode
Less than 14 mA at 100 lux Active Power Consumption in Medium
Gain Mode (Less than 8 mA at Dark)
Less than 200 pA Quiescent Power Dissipation in Power Down
Mode at All Light Levels
Linear Response Over the Full Operating Range
Senses Intensity of Ambient Light from ~0 lux to Over 100,000 lux
Wide Operating Voltage Range (2 V to 5.5 V)
Wide Operating Temperature Range (−40°C to 85°C)
Drop−in Replacement Device in 1.6 x 1.6 mm Package
These Devices are Pb−Free, Halogen Free/BFR Free
and are RoHS Compliant
Applications
Saves display power in applications such as:
Cell Phones, PDAs, MP3 players, GPS
Cameras, Video Recorders
Mobile Devices with Displays or Backlit Keypads
Laptops, Notebooks, Digital Signage
LCD TVs and Monitors, Digital Picture Frames
Automobile Dashboard Displays and Infotainment
LED Indoor/Outdoor Residential and Street Lights
hn
IC1
www.onsemi.com
1
CUDFN6
CU SUFFIX
CASE 505AL
PIN ASSIGNMENT
VDD 1
6 IOUT
VSS 2
5 NC
GB1 3
4 GB2
(Top View)
ORDERING INFORMATION
Device
Package
Shipping
NOA1213CUTAG* CUDFN6
(Pb−Free)
2500 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
*Temperature Range: −40°C to 85°C.
Vin = 2 to 5.5V
GS2 GS1
VDD GB2 GB1
Photo Amp
Diode
IOUT
VSS
NOA1212
C1
1μ
RL CL
ADC
IC2
Figure 1. Typical Application Circuit
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
© Semiconductor Components Industries, LLC, 2015
November, 2015 − Rev. P1
1
Publication Order Number:
NOA1213/D







NOA1213 pdf, 数据表
NOA1213
PACKAGE DIMENSIONS
CUDFN6, 1.6x1.6, 0.5P
CASE 505AL
ISSUE O
D AB
PIN 1
2X 0.10 C
2X 0.10 C
TOP VIEW
0.10 C
0.08 C
NOTE 4
A1
SIDE VIEW
E
A
A3
C
SEATING
PLANE
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED
TERMINAL AND IS MEASURED BETWEEN
0.10 AND 0.20MM FROM THE TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
MILLIMETERS
DIM MIN MAX
A 0.55 0.65
A1 0.00 0.05
A3 0.20 REF
b 0.15 0.25
b2 0.15 REF
D 1.60 BSC
D2 1.05 1.15
E 1.60 BSC
E2 0.45 0.55
e 0.50 BSC
L 0.25 0.35
L2 0.17 REF
L2
PIN ONE
REFERENCE 1
b2
0.10 M C A B
D2
3
6X L
0.10 M C A B
E2
64
6X b
e 0.10
0.05
BOTTOM VIEW
CAB
C NOTE 3
RECOMMENDED
MOUNTING FOOTPRINT*
1.70
6X
0.48
0.75 1.90
1
0.50
PITCH
6X
0.28
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
8
NOA1213/D














页数 8 页
下载[ NOA1213.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
NOA1211Ambient Light SensorON Semiconductor
ON Semiconductor
NOA1212Ambient Light SensorON Semiconductor
ON Semiconductor
NOA1213Ambient Light SensorON Semiconductor
ON Semiconductor

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap